Vantage® TF

Energy efficient, industrial infrared heater for heating dock door areas in factories, warehouses, distribution centers and other high heat loss spaces.


the ONLY heater in the industry that has two heaters in one!

The Twin Fire heater is the ONLY infrared heater on the market incorporating a centralized burner with radiant tubes on each end, resulting in the HIGHEST single heater BTU output in the industry. The main benefit for large, open areas in industrial spaces is the powerful, uniform heat distribution. Typically hard to heat areas like manufacturing facilities, warehouses, assembly areas and especially, near dock doors - are heated efficiently and effectively by the Twin Fire heater.  

The central burner provides the comfort and energy savings of two heaters in one while saving on installation costs with only one electrical and one gas connection. The lowest clearances to combustibles relative to heater output, the Twin Fire can be customized to fit your space with numerous design options including straight, “L” or U-tube configurations. With its robust, welded construction and powder coated finish, this heater can withstand the rigors of factories, overhead door areas and warehouses. 




Smart Retail Cashout area & entry heating solution

Garage Bay HeaterThese retail spaces are difficult to heat and notorious for slip hazards. In cold seasons, chilly drafts and snow/water from opening doors and high traffic are problems for typical air heaters (unit heaters). Overhead infrared heaters heat customers, employees, floors, solid objects directly (like the sun) offering an incredibly effective solution. Occupants are warm despite cold, drafty air. Floors quickly dry since the floor temperature is raised (warmer than the air temperature) by infrared heating. This innovative infrared heater offers an additional cost-saving twist; a way to reduce contractor installation time and costs. “Twin-Fire” infrared heaters heat twice the space, provide twice the heating capacity while requiring half the electrical, gas and venting connections. Essentially two heaters in one. Contractors save time and expense, owners save on installation costs. ......and one more smart feature, these infrared heaters are 20% more efficient than unit heaters.



How to heat a building

Typical Design Layout

Each layout is equally effective in maximizing heat pattern and overall twin fired infrared heater performance. All heaters can be common or individually vented depending on building requirements.

Typical Twin Fire Infrared Heater Layout


Product Specifications

Input (Btu/h) * (1000)

120, 160, 200, 250, 300, 350, 380

Clearances to Combustibles*

63in - 82in / 5.3ft - 6.8ft 

Fuel Type

Natural Gas or LPG Propane

Heat Exchanger Tubing

10ft sections, 4" dia., 16 gauge, first ten feet ALUMI-THERM® steel tubing /
Remaining Heat Treated Aluminized Steel Tubing or Hot Rolled

Reflector and End Caps

.024 Aluminum (Optional- .024 Stainless Steel Type 304) 

Control System

Honeywell® Dual Spark Fully Automatic, Three-Try, Direct Spark Electronic Ignition Control, 100% Shut-off


ANSI Z83.20 / CSA 2.34 / CAN 1-2.20


Three Year Limited 

 *Clearances to Combustibles applies to heater hanging horizontally. Dimension listed for distance below heater.